|
ACCESSORIES
FASTENERS, ETC. |
|
| Resolite offers a complete line of fasteners, sealants and
accessories for use in conjunction with Resolite FRP panels. These items may be ordered
with FRP panels or independently. Many items are in stock for quick delivery. Contact
Resolite Customer Service for availability. |
|
| SB-2 Side Lap
Fastener |
| The SB-2 is a grommet type fastener
used to fasten the side laps between two Resolite panels. They are also used to attach a
flashing member to a Resolite panel in an area when there is no structural backing. The
SB-2 has a stainless steel hex head machine screw with a neoprene sleeve, 3/8"
diameter by 1-1/4" long. As the head is tightened, the grommet expands and provides
an effective seal, as well as flexibility, for normal expansion and contraction. |
|
|
|
| Stainless
Steel Self-Tapping Screws |
| Type 'B' point is
used to fasten Resolite panels to steel girts and purlins. These stainless steel fasteners
come in various lengths and are 1/4" diameter. The standard fasteners come with a
pre-assembled stainless steel backed neoprene washer in 3/4" (.729") diameter. A
5/8" diameter washer is available when required for certain profiles. A 1-1/8"
diameter washer, designed for high wind and impact loads is also available. The fasteners
are available in 300 series stainless steel. For extreme or unusual corrosion conditions,
contact Resolite for special fastener availability. |
| Type 'B' |
 |
| 14 threads per inch |
|
| Type 'A' point is
similar to a 'B' point fastener except it is used to fasten Resolite panels to wood
framing. The 'A' point can also be used to attach Resolite panels to pultruded FRP
structural shapes. |
| Type 'A' |
 |
| 10 threads per inch |
|
|
|
| Closure Strips |
| To give a better appearance and weather
tightness, configurated E.P.D.M. composition closure strips are recommended for sealing
openings created at such areas as ridges, eaves, door openings, etc. They are available in
both horizontal and vertical types for most Resolite profiles. |
Vertical
|
Horizontal
|
|
|
|
| Butyl Tape |
| Butyl tape is used to seal the side
and end laps on opaque Resolite panels. It has an aggressive tack which assures positive
positioning and maximum surface contact. It easily conforms to irregular joint areas and
provides a tough durable corrosion resistant seal against ingress of water and dirt. Butyl
tape is available in 30 ft. rolls 1/8" thick by 3/8" wide. |
 |
|
|
| Clear Silicone
Sealant |
| This clear sealant is used to seal
the side and end laps on translucent Resolite panels. It is permanently pliable with good
application characteristics. It is available in a 10 oz. spouted cartridge and coverage is
approximately 25 lineal feet per cartridge using a 1/4" bead. |
 |
|
| Return to Accessories |
|
copyright 1999
Resolite
|
